Artur Butryn
2014-08-20 10:47:37 UTC
Operating system Windows 7 x64
NUT version 2.6.5 Windows port
UPS Victron NetPro connected via serial port
When I run driver when UPS cable is connected to computer's serial port it
exits with following output
victronups - -DDDD -a victron
Network UPS Tools -GE/IMU/Victron UPS driver 0.20 (2.6.5.-3723:3731M)
0.000000 debug level is "4"
0.000000 w32_serial_open (COM1)
0.000000 setting initial state on COM1
0.015600 0000000050 = w32_serial_open (COM1)
0.015600 Warning: no locking method is available: No error
0.015600 tcgetattr(COM1): Input/output error
But... when I run the driver and few seconds later connect the cable to
serial port it works correctly.
So far no solution found, plz help.
NUT version 2.6.5 Windows port
UPS Victron NetPro connected via serial port
When I run driver when UPS cable is connected to computer's serial port it
exits with following output
victronups - -DDDD -a victron
Network UPS Tools -GE/IMU/Victron UPS driver 0.20 (2.6.5.-3723:3731M)
0.000000 debug level is "4"
0.000000 w32_serial_open (COM1)
0.000000 setting initial state on COM1
0.015600 0000000050 = w32_serial_open (COM1)
0.015600 Warning: no locking method is available: No error
0.015600 tcgetattr(COM1): Input/output error
But... when I run the driver and few seconds later connect the cable to
serial port it works correctly.
So far no solution found, plz help.